This is an old revision of the document!
Table of Contents
set_model_pose_algorithm
Overview
This command sets the method such as 6DOF or Inverse Kinematics for computing model pose. This command can be found under Model Building in the pipeline workshop. This command should be set before computing your desired model building.
Pipeline Command
The command below is as seen on the Visual3D application.
Set_Model_Pose_Algorithm ! /CALIBRATION_FILE= ! /ALGORITHM=6DOF ! /OPTIMIZER= ! /FIT_CALIBRATION_FILE=TRUE ! /START_WITH_SIMULATED_ANNEALING=FALSE ! /F_TOLERANCE=1e-12 ! /X_TOLERANCE=1e-12 ! /G_TOLERANCE=1e-12 ! /IK_USE_ALL_FRAMES=true ! /IK_EVENT_SEQUENCE= ;
Command Parameters
The following table shows the command parameters and descriptions:
| CALLIBRATION_FILE | The name of the hybrid model. Use the full pathname. |
| ALGORITHM | Pose Algorithm to set 6DOF is default or can change to Inverse Kinematics |
| OPTIMIZER | Set optimizer to one of QUASI_NEWTON, LEVENGERG_MARQUARDT or LBFGSB |
| FIT_CALIBRATION_FILE | … |
| START_WITH_SIMULATED_ANNEALING | TRUE FALSE to generate an initial solution before optimization using simulated annealing |
| F_TOLERANCE | Convergence tolerance for the objective function. Default e-12 |
| X_TOLERANCE | Convergence tolerance for optimization variables. Default e-12 |
| G_TOLERANCE | Convergence tolerance for the function gradient. Default e-12 |
| IK_USE_ALL_FRAMES | TRUE or FALSE use all frames for Inverse Kinematics calculations |
| IK_EVENT_SEQUENCE | Define and Event sequence for Inverse Kinematics calculations |
Dialog
The command can be edited in a text editor or in a dialog form. To edit in the dialog pop up form either click on the Edit button in the pipeline workshop or double-click on the pipeline command. The dialog is shown below.
- Image of dialog box
- Brief description of components (Combo boxes, acronyms, etc.)
Examples
Simple example
Showing functionality of the command, using a diagram possibly to show output.
Complex example
Combine with other commands and show step-by-step process for frequent use case
Notes
- Important considerations (anything included in the page before the reformat)