HAS-Motion Software Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Motion Capture Cameras =====

PlanDSX accounts for the cameras that are a part of the motion-capture system. In the 3D view they are represented by a small box (the camera body) and a semi-transparent cone (the field of view). You can place any number of them in the scene and specify the length and radius of the field of view.

==== Adding and Removing Cameras ====

To add a motion capture camera to the scene, press the **Add** button. PlanDSX will add a camera with default parameters pointed at the origin. You can then change its properties using the table and move it in the 3D view. To delete a camera, select it in the table and press the **Remove** button.

{{:PlanDSX_CamerasWidget.png}}

==== Camera Properties ====

^ Property ^ Description ^
| **Name** | When a new camera is created it is given a default name with the format Camera (1), Camera (2) ... Camera (N). To change this name double-click on it and type in a new name.| 
| **Length** | The length of the cone representing the field of view. To change the length double-click on it and enter a new value.| 
| **Radius** | The radius of the end of the cone representing the field of view. To change the radius double-click on it and enter a new value.| 
| **Visibility** | This checkbox toggles the visibility of the motion capture camera in the 3D view.| 
| **Color** | The colour of the camera body and field of view in the 3D view. To change the colour, double-click on the colour box and select a new colour.| 

==== References ====

[[other:dsx:plandsx:plandsx_overview|Back to PlanDSX Overview]]