Differences

This shows you the differences between two versions of the page.

--- visual3d:documentation:pipeline:model_commands:assign_model_file [2024/06/19 12:51] – sgranger
+++ visual3d:documentation:pipeline:model_commands:assign_model_file [2024/07/17 15:46] (current) – created sgranger
@@ Line 1: / Line 1: @@
+====== Assign Model File ======
 ||
-this command assigns a model to specified movement files.
+This command assigns a model to specified movement files.
 <code>
-assign_model_file
+Assign_Model_File
-/calibration_file=name of the standing trial associated with the model.
+/Calibration_File=Name of the standing trial associated with the model.
-/motion_file_names=names of the motion files to be assigned to the model.
+/Motion_File_Names=Names of the motion files to be assigned to the model.
 ;
 </code>
-**note: wildcards (*) can be used for the calibration_file**
+**Note: Wildcards (*) can be used for the Calibration_File**
-**note: tags or wildcards (*) can be used for the motion_file names**
+**Note: TAGS or Wildcards (*) can be used for the Motion_File Names**
-here is an example using pipeline parameters:
+Here is an example using pipeline parameters:
 <code>
-set_pipeline_parameter_to_folder_path
+Set_Pipeline_Parameter_To_Folder_Path
-/parameter_name=folder
+/PARAMETER_NAME=FOLDER
-/parameter_value=c:\exampledata\
+/PARAMETER_VALUE=c:\exampleData\
 ;
-set_pipeline_parameter
+Set_Pipeline_Parameter
-/parameter_name=standing
+/PARAMETER_NAME=STANDING
-/parameter_value=::folder&*static.c3d
+/PARAMETER_VALUE=::FOLDER&*static.c3d
 ;
-set_pipeline_parameter
+Set_Pipeline_Parameter
-/parameter_name=walking
+/PARAMETER_NAME=WALKING
-/parameter_value=::folder&*walk*.c3d
+/PARAMETER_VALUE=::FOLDER&*walk*.c3d
 ;
-assign_model_file
+Assign_Model_File
-/calibration_file=::standing
+/CALIBRATION_FILE=::STANDING
-/motion_file_names=::walking
+/MOTION_FILE_NAMES=::WALKING
 ;
 </code>
-here is the same example, using wild cards in the assign model file command:
+Here is the same example, using wild cards in the Assign Model File command:
 <code>
-assign_model_file
+Assign_Model_File
-/calibration_file=*static.c3d
+/CALIBRATION_FILE=*static.c3d
-/motion_file_names=*walk*.c3d
+/MOTION_FILE_NAMES=*walk*.c3d
 ;
 </code>
-another example can be found on [[visual3d:documentation:pipeline:model_commands:assign_model_file_example|pipeline example using assign model file]]
+Another example can be found on [[Visual3D:Documentation:Pipeline:Model_Commands:Assign_Model_File_Example|Pipeline Example using Assign Model File]]