Differences

This shows you the differences between two versions of the page.

--- other:capture2d:advanced_settings [2024/06/19 12:45] – sgranger
+++ other:capture2d:advanced_settings [2024/07/17 15:44] (current) – created sgranger
@@ Line 1: / Line 1: @@
-{{{{{{{{{{advanced settings are organized into separate categories (tabs) based on hardware manufacturer name and/or capture system product name. the first tab contains common settings that affect capture2d as a whole.
+====== Advanced Settings ======
-below all the tabs is the save settings button. clicking this button displays the standard save as dialog and allows the user to store all internal settings as an xml file on disk. each time a recording is made in the main capture2d window, an xml settings file is also saved along with the recorded data. an open settings button will be added to the advanced dialog in a future release.
+Advanced settings are organized into separate categories (tabs) based on hardware manufacturer name and/or capture system product name. The first tab contains common settings that affect Capture2D as a whole.
-===== common settings =====
+Below all the tabs is the Save Settings button. Clicking this button displays the standard Save As dialog and allows the user to store all internal settings as an XML file on disk. Each time a recording is made in the main Capture2D window, an XML settings file is also saved along with the recorded data. An Open Settings button will be added to the Advanced dialog in a future release.
-five sub-categories make up the common settings: stream, capture, display, server and link model.
+==== Common Settings ====
-advanced_wnd_common_tab.png
+Five sub-categories make up the common settings: Stream, Capture, Display, Server and Link Model.
-==== stream ====
+{{:advanced_wnd_common_tab.png}}
-the stream settings determine how quickly the program tries to acquire new data from connected motion capture hardware.
+=== Stream ===
-=== thread priority ===
+The stream settings determine how quickly the program tries to acquire new data from connected motion capture hardware.
-selects the execution priority for the code that acquires the data from the hardware. possible options are: idle, lowest, low, normal, high, highest, critical.
+== Thread priority ==
-=== thread sleep ===
+Selects the execution priority for the code that acquires the data from the hardware. Possible options are: Idle, Lowest, Low, Normal, High, Highest, Critical.
-sets the number of milliseconds the stream thread gives other processes on the computer to accomplish their tasks.
+== Thread sleep ==
-==== capture ====
+Sets the number of milliseconds the Stream thread gives other processes on the computer to accomplish their tasks.
-the capture settings determine what happens before and after a record how graphical previews are displayed.
+=== Capture ===
-=== countdown ===
+The capture settings determine what happens before and after a record how graphical previews are displayed.
-sets the number of seconds for the countdown before recording starts. when only one person is available to perform the motion capture session.
+== Countdown ==
-=== beep during countdown ===
+Sets the number of seconds for the countdown before recording starts. When only one person is available to perform the motion capture session.
-checked - emits an audible beep for each second of countdown. this feature is useful for alerting the motion capture subject that recording is about to start shorly.
+== Beep during countdown ==
-unchecked - no sound is emitted during countdown.
+Checked - Emits an audible beep for each second of countdown. This feature is useful for alerting the motion capture subject that recording is about to start shorly.
-=== update previews ===
+Unchecked - No sound is emitted during countdown.
-checked - update's the graphical preview to be updated with the latest frame of data from the hardware.
+== Update previews ==
-unchecked - no graphical preview is drawn. this feature is useful when streaming and recording huge amounts of data and computer resources are needed.
+Checked - Update's the graphical preview to be updated with the latest frame of data from the hardware.
-=== show trails ===
+Unchecked - No graphical preview is drawn. This feature is useful when streaming and recording huge amounts of data and computer resources are needed.
-checked - draws a visible trail for each data element at each frame. this feature is useful when calibrating or otherwise needing to know "where" the data has been in the capture volume.
+== Show trails ==
-unchecked - only the latest frame of data elements is drawn. this feature is useful for reducing the visual clutter.
+Checked - Draws a visible trail for each data element at each frame. This feature is useful when calibrating or otherwise needing to know "where" the data has been in the capture volume.
-=== trails size ===
+Unchecked - Only the latest frame of data elements is drawn. This feature is useful for reducing the visual clutter.
-sets the size, in pixels, of the trail. larger sizes are easier to see but can clutter the display.
+== Trails size ==
-=== trails color ===
+Sets the size, in pixels, of the trail. Larger sizes are easier to see but can clutter the display.
-sets the color of the trail using the standard color picker dialog. setting a trail color that is different than the data or background color can help distinguish were the data has been in the past.
+== Trails Color ==
-=== beep after save ===
+Sets the color of the trail using the standard Color Picker dialog. Setting a trail color that is different than the data or background color can help distinguish were the data has been in the past.
-checked - emits an audible beep after a recording is saved to disk. this feature is useful for alerting the motion capture subject that recording was saved.
+== Beep after save ==
-unchecked - no sound is emitted after a recording is saved to disk.
+Checked - Emits an audible beep after a recording is saved to disk. This feature is useful for alerting the motion capture subject that recording was saved.
-==== display ====
+Unchecked - No sound is emitted after a recording is saved to disk.
-the display settings determine how the overall program interface is presented and what the user sees in the graphical previews.
+=== Display ===
-=== application text size ===
+The display settings determine how the overall program interface is presented and what the user sees in the graphical previews.
-sets the font point size of textual information displayed throughout the capture2d interface. it may be helpful to set a large point size when working in a large room where subjects and other onlookers will be far from the display terminal or screen.
+== Application text size ==
-=== preview update rate ===
+Sets the font point size of textual information displayed throughout the Capture2D interface. It may be helpful to set a large point size when working in a large room where subjects and other onlookers will be far from the display terminal or screen.
-sets the rate at which the graphical preview displays are redrawn. this is separate and different from how quickly the stream thread acquires data from the hardware. a faster preview update rate will produced smoother graphics but use more computer resources.
+== Preview update rate ==
-=== 2d appearance ===
+Sets the rate at which the graphical preview displays are redrawn. This is separate and different from how quickly the stream thread acquires data from the hardware. A faster preview update rate will produced smoother graphics but use more computer resources.
-sets the colors of the 2-d preview displays (background color, data color, etc.) using the standard color picker dialog. a variety of useful effects can be accomplished with various color settings.
+== 2D Appearance ==
-=== 3d appearance ===
+Sets the colors of the 2-D preview displays (background color, data color, etc.) using the standard Color Picker dialog. A variety of useful effects can be accomplished with various color settings.
-sets the colors of the 3-d preview displays (background color, data color, etc.) using the standard color picker dialog. a variety of useful effects can be accomplished with various color settings.
+== 3D Appearance ==
-==== server ====
+Sets the colors of the 3-D preview displays (background color, data color, etc.) using the standard Color Picker dialog. A variety of useful effects can be accomplished with various color settings.
-the server settings determine how data streamed into capture2d from motion caption hardware is then served out to other programs (clients) over the internet.
+=== Server ===
-=== start udp server ===
+The server settings determine how data streamed into Capture2D from motion caption hardware is then served out to other programs (clients) over the internet.
-starts and stops the udp server.
+== Start UDP Server ==
-=== target ip ===
+Starts and stops the UDP server.
-sets a new target ip address to add to the list of udp clients.
+== Target IP ==
-=== target port ===
+Sets a new target IP address to add to the list of UDP clients.
-sets a new target port number to add to the list of udp clients.
+== Target Port ==
-=== add udp target ===
+Sets a new target port number to add to the list of UDP clients.
-adds the entered ip and port to the list of know udp targets.
+== Add UDP Target ==
-=== targets ===
+Adds the entered IP and port to the list of know UDP targets.
-displays a list of client target ip and port numbers.
+== Targets ==
-=== clear all udp targets ===
+Displays a list of client target IP and port numbers.
-removes all client ip and port numbers from the list.
+== Clear All UDP Targets ==
-==== link model ====
+Removes all client IP and port numbers from the list.
-the link model settings determine how segments are computed and served.
+=== Link Model ===
-=== open ===
+The link model settings determine how segments are computed and served.
-selects the xml link model template to apply to the streamed data.
+== Open ==
-=== stream to server ===
+Selects the XML link model template to apply to the streamed data.
-checked - an xml linked model of segments is computed and served over the internet along with data.
+== Stream to server ==
-unchecked - no link model of segments is computed and served over the internet.
+Checked - an XML linked model of segments is computed and served over the internet along with data.
-===== naturalpoint =====
+Unchecked - no link model of segments is computed and served over the internet.
-capture2d supports naturalpoint v100:r1 and v100:r2 camera systems and optihub and requires usb drivers, available from [[[http://www.naturalpoint.com/|naturalpoint's website]]]. the optihub provides basic synchronization features.
+==== NaturalPoint ====
-advanced_wnd_np_tab.png
+Capture2D supports NaturalPoint V100:R1 and V100:R2 camera systems and OptiHub and requires USB drivers, available from [[[http://www.NaturalPoint.com/|NaturalPoint's website]]]. The OptiHub provides basic synchronization features.
-==== try to connect ====
+{{:advanced_wnd_np_tab.png}}
-==== pulse mode ====
+=== Try to connect ===
-off - no external sync pulses are sent from the optihub, even when the cameras are connected and streaming.
+=== Pulse Mode ===
-always on - external sync pluses are sent from the optihub continuously when the cameras are connected and streaming.
+Off - no external sync pulses are sent from the OptiHub, even when the cameras are connected and streaming.
-on during recording - sync pulses are only sent from the optihub when capture2d is recording.
+Always on - external sync pluses are sent from the OptiHub continuously when the cameras are connected and streaming.
-==== pulse phase ====
+On during recording - sync pulses are only sent from the OptiHub when Capture2D is recording.
-in phase - no global offset is applied.
+=== Pulse Phase ===
-delayed by global offset - controls the delay between any of the chosen sync input sources and when the cameras are actually told to trigger (i.e. expose a frame). units is in us. valid range: 0 – 65,862 us.
+In phase - No global offset is applied.
-==== pulse duration ====
+Delayed by global offset - Controls the delay between any of the chosen sync input sources and when the cameras are actually told to trigger (i.e. expose a frame). Units is in us. Valid Range: 0 – 65,862 us.
-exposure time - external sync output signal is asserted when the ir-strobes are turned on, which is concurrent with when the sensors are exposed. the signal is asserted for as long as the strobe is on (and the imager is exposing).
+=== Pulse Duration ===
-pass through - a ttl level-translated version of the signal applied to the external sync input jack is presented on the external sync output jack for daisy-chaining applications.
+Exposure time - External sync output signal is asserted when the IR-strobes are turned on, which is concurrent with when the sensors are exposed. The signal is asserted for as long as the strobe is on (and the imager is exposing).
-recording level - external sync output signal is asserted continuously when the application is recording, and de-asserted when recording is stopped.
+Pass through - a TTL level-translated version of the signal applied to the External Sync Input Jack is presented on the External Sync Output Jack for daisy-chaining applications.
-recording pulse - like exposure time, except pulses are issued only when the application is recording, and idle when recording is stopped.
+Recording level - External sync output signal is asserted continuously when the application is recording, and de-asserted when recording is stopped.
-==== invert pulse polarity ====
+Recording pulse - Like Exposure Time, except pulses are issued only when the application is recording, and idle when recording is stopped.
-unchecked - the pulse polarity is normal (also known as active-high).
+=== Invert Pulse Polarity ===
-checked - the pulse polarity's amplitude is inverted (also known as active-low).
+Unchecked - the pulse polarity is normal (also known as Active-High).
-for more information on naturalpoint's optihub settings, see [[[http://www.naturalpoint.com/optitrack/static/documents/optihub%20user%20guide.pdf|optihub users guide]]].
+Checked - the pulse polarity's amplitude is inverted (also known as Active-Low).
-==== frequency ====
+For more information on NaturalPoint's OptiHub settings, see [[[http://www.naturalpoint.com/optitrack/static/documents/OptiHub%20User%20Guide.pdf|OptiHub Users Guide]]].
-selects the system frequency (i.e., the common frequency in which each camera is running). valid settings are 100 hz (default), 50 hz and 25 hz. changing the system frequency adjust all connected cameras to that frequency.
+=== Frequency ===
-==== frames to record ====
+Selects the system frequency (i.e., the common frequency in which each camera is running). Valid settings are 100 Hz (default), 50 Hz and 25 Hz. Changing the system frequency adjust all connected cameras to that frequency.
-indicates the number of frames that will be recorded. this value is determined by 1) the system frequency and 2) the record duration in seconds in the main capture2d window.
+=== Frames to record ===
-==== sensor list ====
+Indicates the number of frames that will be recorded. This value is determined by 1) the system frequency and 2) the record duration in seconds in the main Capture2D window.
-contains a list of each connected sensor (camera). settings displayed below the sensor list are applied to the currently selected sensor.
+=== Sensor List ===
-==== ir led ====
+Contains a list of each connected sensor (camera). Settings displayed below the sensor list are applied to the currently selected sensor.
-sets the infrared led setting for the currently selected sensor in the sensor list display (above).
+=== IR LED ===
-==== threshold ====
+Sets the Infrared LED setting for the currently selected sensor in the sensor list display (above).
-sets the threshold setting for the currently selected sensor in the sensor list display (above).
+=== Threshold ===
-==== expsoure ====
+Sets the threshold setting for the currently selected sensor in the sensor list display (above).
-sets the expsoure setting for the currently selected sensor in the sensor list display (above).
+=== Expsoure ===
-==== apply to all ====
+Sets the expsoure setting for the currently selected sensor in the sensor list display (above).
-applies all settings (ir led, threshold, exposure) of the currently selected sensor to all connected sensors.
+=== Apply to All ===
-===== ndi firstprinciples =====
+Applies all settings (IR LED, threshold, exposure) of the currently selected sensor to all connected sensors.
-capture2d supports the ndi (northern digial inc.) firstprinciples ethernet stream, so no drivers are required on the client side (the computer running capture2d). the server machine running firstprinciples does required northern digital's pci interface and drivers.
+==== NDI FirstPrinciples ====
-advanced_wnd_ndi_tab.png
+Capture2D supports the NDI (Northern Digial Inc.) FirstPrinciples Ethernet stream, so no drivers are required on the client side (the computer running Capture2D). The server machine running FirstPrinciples does required Northern Digital's PCI interface and drivers.
-==== try to connect ====
+{{:advanced_wnd_ndi_tab.png}}
-==== device list ====
+=== Try to connect ===
-==== frequency ====
+=== Device List ===
-==== frames to record ====
+=== Frequency ===
-===== amti =====
+=== Frames to record ===
-capture2d supports the amti gen5 digital signal conditional and requires usb drivers, available from [[[http://www.amti.biz/|amti's website]]].
+==== AMTI ====
-advanced_wnd_amti_tab.png
+Capture2D supports the AMTI Gen5 digital signal conditional and requires USB drivers, available from [[[http://www.amti.biz/|AMTI's website]]].
-==== try to connect ====
+{{:advanced_wnd_amti_tab.png}}
-==== device list ====
+=== Try to connect ===
-==== frequency ====
+=== Device List ===
-==== frames to record ====
+=== Frequency ===
-==== zero ====
+=== Frames to record ===
-==== genlock on ====
+=== Zero ===
-==== edit force plate parameters ====
+=== Genlock On ===
-===== bertec =====
+=== Edit Force Plate Parameters ===
-capture2d supports the bertec am6500 digital signal conditional and requires usb drivers, available from [[[http://www.bertec.com/|bertec's website]]].
+==== Bertec ====
-advanced_wnd_bertec_tab.png
+Capture2D supports the Bertec AM6500 digital signal conditional and requires USB drivers, available from [[[http://www.bertec.com/|Bertec's website]]].
-==== try to connect ====
+{{:advanced_wnd_bertec_tab.png}}
-==== device list ====
+=== Try to connect ===
-==== frequency ====
+=== Device List ===
-==== frames to record ====
+=== Frequency ===
-==== zero ====
+=== Frames to record ===
-==== genlock on ====
+=== Zero ===
+=== Genlock On ===
+=== Edit Force Plate Parameters ===
-==== edit force plate parameters ====
-}}}}}}}}}}