Differences

This shows you the differences between two versions of the page.

--- other:amass:documentation:system_calibration [2024/07/03 17:34] – created sgranger
+++ other:amass:documentation:system_calibration [2024/07/17 15:44] (current) – created sgranger
@@ Line 1: / Line 1: @@
-====== System_calibration ======
+====== System calibration ======
 The calibration process involves collecting camera data of the moving wand, ensuring that the Calibrate parameters have desired values, and running the Calibrate program from the Function group in the AMASS shell. The calibration does not require any parameters of a technical nature, and the ones required are mostly self explanatory.
@@ Line 12: / Line 12: @@
 The //Calibrate// page displays all user modifiable parameters for the calibration. On inspection it will be seen that not one of the parameters refers to the calibration computation itself, relieving the user from making difficult and confusing decisions with respect to the complex calculations that are involved in the calibration process.
-{{parameters_track.jpg}}
+{{:parameters_track.jpg}}
 === mm /unit ===
@@ Line 77: / Line 77: @@
 === Marker Alignment ===
-{{BlackDot.jpg}}
+{{:BlackDot.jpg}}
 The black dot on each marker must point towards the wand structure.
@@ Line 139: / Line 139: @@
 A successful calibration’s results may be viewed by the ViewLin program. The user is presented with the screen shown below. The main graphics view shows the area of a camera’s image that was calibrated, with the grid indicating the lens distortions present for the particular camera.
-{{a10.png}}
+{{:a10.png}}
 === Items in group box ===